 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LIGHT BAR LED DISPLAY Pb Lead-Free Parts LBD511SGL-XX-PF DATA SHEET DOC. NO REV. DATE : : QW0905- LBD511SGL-XX-PF A : 15 - Aug. - 2006 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LBD511SGL-XX-PF Page 1/7 Package Dimensions 15.0 PIN 1 15.0 13.5 5.08 (0.2") 2 LBD511SGL-XX-PF LIGITEK 11.2 O0.51 TYP 7.00.5 Note : 1.All dimension are in millimeters and (lnch) tolerance is 0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LBD511SGL-XX-PF Page 2/7 Internal Circuit Diagram LBD511SGL-XX-PF 2 1 1.CATHODE 2.ANODE Electrical Connection PIN NO.1 1 2 Cathode Anode LBD511SGL-XX-PF LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LBD511SGL-XX-PF Page 3/7 Absolute Maximum Ratings at Ta=25 Ratings Parameter Symbol SGL Forward Current Per Chip Peak Forward Current Per Chip (Duty 1/10,0.1ms Pulse Width) Power Dissipation Per Chip Reverse Current Per Any Chip Electrostatic Discharge( * ) Operating Temperature Storage Temperature IF 30 100 mA UNIT IFP mA PD Ir ESD Topr Tstg 120 50 1000 -25 ~ +85 -25 ~ +85 mW A V Solder Temperature 1/16 Inch Below Seating Plane For 3 Seconds At 260 Static Electricity or power surge will the Use of anti-electrosatic * glove is recommended when handingdamageLED.LED.devices, a conductive wrist band or must be properly these All equipment and machinery grounded. Part Selection And Application Information(Ratings at 25) Electrical CHIP PART NO Material LBD511SGL-XX-PF common P D Vf(v) Iv(mcd) IV-M cathode (nm) (nm) (nm) Typ. Max. Min. Typ. Emitted or anode Green InGaN/SiC Common Cathode 502 505 30 3.5 4.2 58 91 2:1 Note : 1.The forward voltage data did not including 0.1V testing tolerance. 2. The luminous intensity data did not including 15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LBD511SGL-XX-PF Page 4/7 Test Condition For Each Parameter Parameter Forward Voltage Per Chip Luminous Intensity Per Chip Peak Wavelength Dominant Wavelength Spectral Line Half-Width Reverse Current Any Chip Luminous Intensity Matching Ratio Symbol Vf Iv Unit volt mcd nm nm nm Test Condition If=20mA If=20mA If=20mA If=20mA If=20mA Vr=5V P D Ir IV-M A LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LBD511SGL-XX-PF Page5/7 Typical Electro-Optical Characteristics Curve SGL CHIP Fig.1 Forward current vs. Forward Voltage 25 Fig.2 Relative Intensity vs. Forward Current 1.5 Forward Current(mA) 20 10 15 5 0 1.5 2.0 2.5 3.0 3.5 4.0 Relative Intensity Normalize @20mA 1.0 0.5 0.0 0 5 10 15 20 25 Forward Voltage(V) Fig.3 Forward Current vs. Ambient Temp 40 Forward Current(mA) Fig.4 Relative Intensity vs. Ambient Temp Relative Luminous Intensity(a.u.) 2.0 Forward Current(mA) 30 1.5 20 1.0 10 0.5 0.0 25 30 35 40 45 50 55 60 65 70 0 0 20 40 60 80 100 Ambient Temperature Ta() Ambient Temperature Ta() Fig.5 Relative Intensity vs. Wavelength 1.0 Relative Intensity@20mA 0.5 0.0 300 400 500 600 Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LBD511SGL-XX-PF Page 6/7 Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350 C Max Soldering Time:3 Seconds Max(One Time) Distance:Solder Temperature 1/16 Inch Below Seating Plane For 3 Seconds At 260C 2.Wave Soldering Profile Dip Soldering Preheat: 120C Max Preheat time: 60seconds Max Ramp-up 2 C/sec(max) Ramp-Down:-5 C/sec(max) Solder Bath:260C Max Dipping Time:3 seconds Max Distance:Solder Temperature 1/16 Inch Below Seating Plane For 3 Seconds At 260 C Temp(C) 260 C3sec Max 260 5 /sec max 120 2 /sec max Preheat 60 Seconds Max 25 0 0 50 100 150 Time(sec) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LBD511SGL-XX-PF Page 7/7 Reliability Test: Test Item Test Condition 1.Under Room Temperature 2.If=10mA 3.t=1000 hrs (-24hrs, +72hrs) Description This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. Reference Standard MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 Operating Life Test High Temperature Storage Test 1.Ta=105 5 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. MIL-STD-883:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. JIS C 7021: B-12 High Temperature High Humidity Test 1.Ta=65 5 2.RH=90 %~95 % 3.t=240hrs 2hrs The purpose of this test is the resistance of the device under tropical for hours. MIL-STD-202:103B JIS C 7021: B-11 Thermal Shock Test 1.Ta=105 5&-405 (10min) (10min) 2.total 10 cycles The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 Solder Resistance Test 1.T.Sol=260 5 2.Dwell time= 10 1sec. MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 Solderability Test 1.T.Sol=230 5 2.Dwell time=5 1sec This test intended to see soldering well performed or not. MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 |
Price & Availability of LBD511SGL-XX-PF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |